Monitoring and Administration
Overview
FIX Antenna library provides access to embedded monitoring and administrative functionality by means of usual sessions. Creation of an admin session requires configuring the parameters:
autostart.acceptor.targetIds
autostart.acceptor.targetId.login
autostart.acceptor.targetId.password
autostart.acceptor.targetId.ip
autostart.acceptor.targetId.fixServerListener
and creating a FIX session with one of configured parameters of TargetCompID (autostart.acceptor.targetIds).
By default these parameters have the following values:
autostart.acceptor.targetIds=admin,admin1
autostart.acceptor.admin.login=admin
autostart.acceptor.admin.password=admin
autostart.acceptor.admin.ip=*
autostart.acceptor.admin.fixServerListener=FixAntenna.AdminTool.AdminTool,FixAntenna.AdminTool
autostart.acceptor.admin1.login=admin1
autostart.acceptor.admin1.password=admin1
autostart.acceptor.admin1.ip=*
autostart.acceptor.admin1.fixServerListener=FixAntenna.AdminTool.AdminTool,FixAntenna.AdminTool
All FIX messages from a client of such session are transferred to AdminTool class,
where they are handled.
FIX XML message (MsgType = n) is used to transport commands or execution results in the XML form.
An example of a FIX XML message with command:
8=FIX.4.49=17435=n49=MonitoringTool56=FIXADMIN34=252=20050811-12:22:53212=89213=<?xml version="1.0" encoding="utf-8"?>
<ToBackup>
<SenderCompID>TestSender</SenderCompID>
<TargetCompID>TestTarget</TargetCompID>
</ToBackup>10=012
An example of a FIX XML message with response:
8=FIX.4.49=18235=n49=FIXADMIN56=MonitoringTool34=252=20050811-12:22:55212=97213=<?xml version="1.0" encoding="utf-8"?>
<Response ResultCode="3">
<Description>Unknown session</Description>
</Response>10=043
The customer has an opportunity to extend basic functionality:
- customer can develop his own utility, the protocol is open;
- customer can register his own service session client to support other instructions;
- customer can register his own class inherited from abstract class Command
and register the root package to new class in the configurations file (set value for
the parameter autostart.acceptor.command.package) to support other instructions.
For example:
autostart.acceptor.command.package=MyCompany.AdminCommands
Response result codes
Each response of RAI has special ResultCode attribute.
| Code | Description |
| 0 | This result code indicates that RIA has successfully processed the request. |
| 1 | The requested operation is not implemented. |
| 3 | The RAI can't find requested session. |
| 6 | The RAI thrown unexpected error during processing request of client. |
| 7 | The client request was rejected. |
| 9 | The client request has an invalid parameter. |
Supported commands
Monitoring and administrative commands as well as execution results are transported by means of FIX XML messages (MsgType = n).
Monitoring commands:
SessionsList - subscription request to get list of sessions.
An example of a request:
<SessionsList RequestID="1"> <SubscriptionRequestType>1</SubscriptionRequestType> </SessionsList>An example of a response:
<Response ResultCode="0" RequestID="1"> <SessionsListData> <Session> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> <Timestamp>2010-03-26T16:54:03.443+02:00</Timestamp> <Status>CONNECTED</Status> <StatusGroup>ESTABLISHED</StatusGroup> <Action>NEW</Action> </Session> </SessionsListData> </Response>SessionsSnapshot - request to get detailed information about the list of sessions.
An example of a request:
<SessionsSnapshot RequestID="1"> <View>STATUS_PARAMS</View> </SessionsSnapshot>An example of a response:
<Response ResultCode="0" RequestID="1"> <SessionsSnapshotData> <Session> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> <StatusData> <Status>CONNECTED</Status> <StatusGroup>ESTABLISHED</StatusGroup> <BackupState>PRIMARY</BackupState> <InSeqNum>3</InSeqNum> <OutSeqNum>3</OutSeqNum> </StatusData> <ParamsData> <Version>FIX44</Version> <Role>ACCEPTOR</Role> <RemoteHost>127.0.0.1</RemoteHost> <RemotePort>1694</RemotePort> <ExtraSessionParams> <HBI>120</HBI> <StorageType>PERSISTENT</StorageType> <EnableMessageRejecting>true</EnableMessageRejecting> <ClientType>GENERIC</ClientType> <ReconnectMaxTries>-1</ReconnectMaxTries> <InSeqNum>4</InSeqNum> <OutSeqNum>4</OutSeqNum> <ForceSeqNumReset>ALWAYS</ForceSeqNumReset> </ExtraSessionParams> </ParamsData> </Session> </SessionsSnapshotData> </Response>SessionParams - request to get detailed information about the session.
An example of a request:
<SessionParams RequestID="3"> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> </SessionParams>An example of a response:
<Response ResultCode="0" RequestID="3"> <SessionParamsData> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> <Version>FIX44</Version> <Role>ACCEPTOR</Role> <RemoteHost>127.0.0.1</RemoteHost> <RemotePort>1694</RemotePort> <ExtraSessionParams> <HBI>120</HBI> <StorageType>PERSISTENT</StorageType> <EnableMessageRejecting>true</EnableMessageRejecting> <ClientType>GENERIC</ClientType> <ReconnectMaxTries>-1</ReconnectMaxTries> <InSeqNum>4</InSeqNum> <OutSeqNum>4</OutSeqNum> <ForceSeqNumReset>ALWAYS</ForceSeqNumReset> </ExtraSessionParams> </SessionParamsData> </Response>SessionStatus - request to get the session status.
An example of a request:
<SessionStatus RequestID="2"> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> </SessionStatus>An example of a response:
<Response ResultCode="0" RequestID="2"> <SessionStatusData> <SenderCompID>admin</SenderCompID> <TargetCompID>FIXICC</TargetCompID> <Status>CONNECTED</Status> <StatusGroup>ESTABLISHED</StatusGroup> <BackupState>PRIMARY</BackupState> <InSeqNum>3</InSeqNum> <OutSeqNum>3</OutSeqNum> </SessionStatusData> </Response>SessionStat - request to get statistical information about the session.
An example of a request:
<SessionStat RequestID="15"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> </SessionStat>An example of a response:
<Response ResultCode="0" RequestID="15"> <SessionStatData> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> <ReceivedBytes>5107901</ReceivedBytes> <SentBytes>6445854</SentBytes> <ReceivedMessages>25539</ReceivedMessages> <SentMessages>32229</SentMessages> <Established>2008-05-13T07:55:23</Established> <TerminatedNormal>2008-05-13T07:51:34</TerminatedNormal> <TerminatedAbnormal>2008-05-10T15:43:11</TerminatedAbnormal> <LastReceivedMessage>2008-05-13T18:21:10</LastReceivedMessage> <LastSentMessage>2008-05-13T18:21:10</LastSentMessage> </SessionStatData> </Response>GeneralSessionsStat - request to get statistical information about the current state of FIX Engine.
An example of a request:
<GeneralSessionsStat RequestID="25"/>An example of a response:
<Response ResultCode="0" RequestID="25"> <GeneralSessionsStatData> <ActiveSessions>2</ActiveSessions> <ReconnectingSessions>1</ReconnectingSessions> <AwaitingSessions>0</AwaitingSessions> <TerminatedNormalSessions>32</TerminatedNormalSessions> <TerminatedAbnormalSessions>5</TerminatedAbnormalSessions> <NumOfProcessedMessages>10345</NumOfProcessedMessages> <MaxSessionLifetime>204580</MaxSessionLifetime> <MinSessionLifetime>4523</MinSessionLifetime> <LastSessionCreation>2008-05-13T18:21:10</LastSessionCreation> </GeneralSessionsStatData> </Response>ReceivedStat - request to get received messages quantity.
An example of a request:
<ReceivedStat RequestID="10"/>An example of a response:
<Response ResultCode="0" RequestID="10"> <ReceivedStatData> <ReceivedMessages>76617</ReceivedMessages> </ReceivedStatData> </Response>SentStat - request to get sent messages quantity.
An example of a request:
<SentStat RequestID="20"/>An example of a response:
<Response ResultCode="0" RequestID="20"> <SentStatData> <SentMessages>96687</SentMessages> </SentStatData> </Response>ProceedStat - request to get proceeded messages quantity.
An example of a request:
<ProceedStat RequestID="30"/>An example of a response:
<Response ResultCode="0" RequestID="30"> <ProceedStatData> <ProceedMessages>173304</ProceedMessages> </ProceedStatData> </Response>
Administrative commands:
CreateInitiator - request to create a FIX session with initiator role.
An example of a request:
<CreateInitiator RequestID="46"> <SenderCompID>TEST</SenderCompID> <TargetCompID>TEST2</TargetCompID> <Version>FIX44</Version> <RemoteHost>localhost</RemoteHost> <RemotePort>3000</RemotePort> <ExtraSessionParams> <SenderSubID>TEST_SUB</SenderSubID> <TargetSubID>TEST2_SUB</TargetSubID> <HBI>30</HBI> <StorageType>PERSISTENT</StorageType> <MaxMessagesAmountInBunch>100</MaxMessagesAmountInBunch> <EnableMessageRejecting>false</EnableMessageRejecting> <SocketOpPriority>EVEN</SocketOpPriority> <ForcedReconnect>false</ForcedReconnect> <DisableTCPBuffer>false</DisableTCPBuffer> <ForceSeqNumReset>ON</ForceSeqNumReset> <IntradayLogoutToleranceMode>false</IntradayLogoutToleranceMode> <IgnoreSeqNumTooLowAtLogon>false</IgnoreSeqNumTooLowAtLogon> <EncryptMethod>NONE</EncryptMethod> </ExtraSessionParams> </CreateInitiator>An example of a response:
<Response ResultCode="0" RequestID="46"> <Description>CreateInitiator completed</Description> </Response>ToBackup - request to switch the FIX session to backup connection.
An example of a request:
<ToBackup RequestID="35"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> </ToBackup>An example of a response:
<Response ResultCode="0" RequestID="35"> <Description>ToBackup completed</Description> </Response>ToPrimary - request to switch the FIX session back to primary connection.
An example of a request:
<ToPrimary RequestID="35"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> </ToPrimary>An example of a response:
<Response ResultCode="0" RequestID="35"> <Description>ToPrimary completed</Description> </Response>Delete - request to delete the FIX session.
An example of a request:
<Delete RequestID="35"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> <SendLogout>true</SendLogout> <LogoutReason>Evacuation</LogoutReason> </Delete>An example of a response:
<Response ResultCode="0" RequestID="35"> <Description>Delete completed</Description> </Response>DeleteAll - request to delete all FIX sessions.
An example of a request:
<DeleteAll RequestID="95"> <SendLogout>true</SendLogout> <LogoutReason>Evacuation</LogoutReason> </DeleteAll>An example of a response:
<Response ResultCode="0" RequestID="95"> <Description>DeleteAll completed</Description> </Response>
Other commands:
ChangeSeqNum - request to change session sequence number.
An example of a request:
<ChangeSeqNum RequestID="45"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> <InSeqNum>100</InSeqNum> <OutSeqNum>100</OutSeqNum> </ChangeSeqNum>An example of a response:
<Response ResultCode="0" RequestID="45"> <Description>ChangeSeqNum completed</Description> </Response>ResetSeqNum - request to reset session sequence number (force seqnum reset logon).
An example of a request:
<ResetSeqNum RequestID="55"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> </ResetSeqNum>An example of a response:
<Response ResultCode="0" RequestID="55"> <Description>ResetSeqNum completed</Description> </Response>TestRequest - request to send a Test Request message to the session.
An example of a request:
<TestRequest RequestID="65"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> <TestReqID>12345576</TestReqID> </TestRequest>An example of a response:
<Response ResultCode="0" RequestID="65"> <Description>TestRequest completed</Description> </Response>Heartbeat - request to send a Heartbeat message to the session.
An example of a request:
<Heartbeat RequestID="75"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> </Heartbeat>An example of a response:
<Response ResultCode="0" RequestID="75"> <Description>"beat"</Description> </Response>SendMessage - request to send a message to the session.
An example of a request:
<SendMessage RequestID="85"> <SenderCompID>TestSender</SenderCompID> <TargetCompID>TestTarget</TargetCompID> <Message>8=FIX.4.29=05635=849=THEM56=US37=117=134=53011=00492-0476150=039=010=161</Message> </SendMessage>An example of a response:
<Response ResultCode="0" RequestID="85"> <Description>SendMessage completed</Description> </Response>Help - request to get the list of supported commands. An example of a request:
<Help RequestID="100"/>An example of a response:
<Response ResultCode="0" RequestID="100"> <HelpData> ... </HelpData> </Response>